HARDT
Responsive, Reliable Solutions
4 of 27
CUS
-009
-0002
-09
3. Before You Begin
3.
Before You Begin
3.1
About This Manual
This manual contains information necessary for the installation of the HARDT Equipment Manufacturing
(hereafter referred to as Hardt) Elemendt
®
1000. Retain this manual for future reference. To help with the
utilization of this manual, certain information has been highlighted as follows:
INFORMATION THAT REFERS TO ACTIONS WHICH MAY HAVE CONSEQUENCES
POTENTIALLY DANGEROUS TO OPERATOR AND/OR THE EQUIPMENT.
Information for proper installation and functioning.
Additional Important Information.
3.2
Who Should Install the Equipment
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or
death. Ensure everyone who is installing this machine has thoroughly read this entire document and
understands the safety information provided.
Only qualified personnel should work on specific tasks required for installing this equipment. Drain
connections must be done by a licensed plumber. All electrical connection installation must be done by a
qualified electrician.
3.3
Equipment Safety
ENSURE THAT ELECTRICAL CORDS ARE UNDAMAGED, AND NO BARE WIRES ARE VISIBLE.
ENSURE THAT THERE ARE NO FLUID LEAKS FROM THE ROTISSERIE. FAILURE TO DO SO
CAN RESULT IN INJURY OR PROPERTY DAMAGE.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE
VICINITY OF THIS APPLIANCE. KEEP THE AREA SURROUNDING THIS APPLIANCE FREE OF
ANY COMBUSTIBLE MATERIAL.
FAILURE TO FOLLOW THE INSTRUCTIONS LISTED IN THIS DOCUMENT CAN RESULT IN
INJURY, DEATH, AND PROPERTY DAMAGE THAT MAY NOT BE COVERED BY YOUR
WARRANTY
READ ALL DOCUMENTATION; ONLY PEOPLE WHO HAVE READ AND UNDERSTAND THE
DOCUMENTATION SHOULD INSTALL THE EQUIPMENT.
Contact Hardt or an approved service provider immediately if any problems are encountered
with your equipment.
