Hardi ZENIT 400, Оригинальная инструкция

Страница: 52 / 118

48
4 - Starting up
Adjustment of BOXER boom
Important to avoid destructive slack in the telescoping part, the slack
must be adjusted.
Loosen counter but A tighten in bolt B , not the press into the
telescoping boom part, but just hold it firm and avoid slack. Tighten
counter nut again.
Grease the part every 200 hours or annually.
The indicated nylon friction parts must be kept clean, avoid sand and
dust in them.
Replace when worn.
CRONOS BOOM
Exist as SOLID , RIDER , GV or VARIA
SOLID
7.1 me boom width, the spray device can easily be positioned on the
boom with and or in the centre section.
The booms wing is equiped with a non adjustebale rubber suspention,
to absorbed the knocks from driving in the fied. Secure the rubber
parts is intacts , and bolts are in place with luck part threaded well in
over the bolt.
B
A
B