Hardi ZENIT 400, Оригинальная инструкция

Страница: 39 / 118

35
4 - Starting up
General information
Unloading the mistblower from the truck
When loading or unloading the mistblower to/from a lorry by using a
lever and pulley or a crane, use the suspension points shown on the
diagram and make sure the straps used are strong enough.
DANGER! Nobody must stand below or next to the machine
during loading or unloading.
Before starting up for the first time
Although the surface of the metallic parts of the mist blower have been coated with a strong, protective product, we
recommend you to apply a layer of anti-corrosion oil (e.g. CASTROL RUSTILLO or SHELL ENSIS FLUID) to all metal parts to
avoid chemical products from discolouring the enamel, as well as to ease future cleaning.
ATTENTION! This treatment should be carried out whenever the protective layer wears off.
Counterweights
Check if it is necessary to place a counterweight on the front of the
tractor, to increase the stability and steering performance.