Hardi MASTER PRO VHH Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 82

Hardi MASTER PRO VHH Скачать руководство пользователя страница 23

3 - Description

23

Equipment

Nozzle pressure gauge

The remote pressure gauge is integrated at the front of the sprayer. This gauge measures the working pressure in the boom
tubes as close to the nozzles as possible.

The outputs stated in the nozzle charts are always based on the pressure measured at the nozzle. Both when calibrating and
spraying, the pressure must be adjusted according to the readings of this pressure gauge.

Footboard (optional)

The footboard gives access to the main tank lid. It ensures easy access
for filling of sprays, cleaning of tank, etc.

Safety locker (optional)

A safety locker can be mounted underneath the footboard. The safety
locker is for storage of safety gear such as non-contaminated protective
gear, soap for hand washing etc. The locker is split in two compartments
for the separation of clean clothes and contaminated equipment.

±

WARNING! Although this locker is meant for the storing of non-
contaminated items, it must never be used for the storing of food,
beverage or other items meant for consumption.

Tank level indicator

The actual tank level in the main tank can be observed on the tank level
indicator. The scale is displayed in litres or Imp. gal/US gal. (certain
countries).

«
...
21
22
23
24
25
...
»

Содержание MASTER PRO VHH



















































































Отзывы:

Нет отзывов