Typical Camper Install:
The diagram is to be taken as a reference only.
Shown is 4 Orange & White bars with cables
and accessories.
You do not have to follow this layout, you can
place the bars and cables where ever you like
to best suit your camp set up!
Additional supplied
extension cable
can be inserted
into the wiring flow
where needed.
Swing out
tailgate door
Assembly:
The below assembly is
only a guide
, as this kit is able to be arranged in
multiple different setups to suit your needs.
Step 1. Connect your 12v cigarette lead to an output. If you have a transformer, you may
use this instead if needed.
Step 2. Depending on your campsite, connect a extension cable if needed.
Step 3. From the extension cable, you can either add more cables, or you can add a
controller.
Step 4. From the controller, you can add the splitter onto it to divert your lighting up
to 3 different ways, unless you have a 2-way splitter.
Step 5. And finally from here its all up to you!
You can either extend the kit with extension cables, or finally your rigid bars.
Instructions
6
7
Remove O ring if above
connection does not work
Instructions
Plug end view
Key lock
Make sure plugs connect properly or it may cause
LED lights not to work or change colour
ALIGN KEY
LOCK ENDS
