background image

ASSEMBLY & OPERATING INSTRUCTIONS

90928

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web Site at www.harborfreight.com

Copyright

©

 2003 by Harbor Freight Tools

®

.  All rights reserved.  No portion of this manual or

any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.

For technical questions and replacement parts please call 1-800-444-3353.

®

WALL MOUNT CABINET

WITH SHELF

Содержание Storehouse 90928

Страница 1: ...com Copyright 2003 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 WALL MOUNT CABINET WITH SHELF ...

Страница 2: ...duct any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for any broken or damaged parts and any other conditions that may affect its operation Replace or repair damaged or worn parts immediately 5 Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will...

Страница 3: ... the second Side 1 and set it so that the key shaped holes slide onto the extensions on the Shelf 2 Slide Side 1 down to secure Side 1 to Shelf 2 3 Place the Tool Tray 6 so that the holes in the lower edge of the Tool Tray 6 line up with the holes in the Side 1 below the lowest shelf Secure the Tool Tray 6 in place with Nut and Bolt 7 see Figure 2 The Tool Tray 6 will fold out and also will neatly...

Страница 4: ...444 3353 Parts List Part Description Quantity Part Description Quantity 1 Side 2 5 Spring 1 2 Shelf 3 6 Tool Tray 1 3 Large Washer 2 7 Nut and Bolt 2 4 Not Used 8 Tube 1 Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts PLEASE READTHE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN T...

Отзывы: