background image

Page 5

For technical questions, please call 1-888-866-5797.

56385 

        

SAF

eT

y

O

Pe

RA

Ti

O

n

M

A

in

Ten

A

n

C

e

Se

Tu

P

Button/Coin Battery Warnings

WARNING

inGeSTiOn HAZARD: 

This product contains a 

button cell or coin battery.

This symbol means: 

inGeSTiOn HAZARD: 

This product contains a 

button cell or coin battery.

1.  Immediately 

dispose of used batteries 

and keep away from children. Do NOT 

dispose of batteries in household trash.

2.  Even used batteries may cause 

severe injury or death.

3.  Call a local poison control center 

for treatment information.

4.  Do not mix old and new batteries, different 

brands or types of batteries, such as alkaline, 

carbon-zinc, or rechargeable batteries.

5.  Ensure the batteries are installed correctly 

according to polarity (+ and -).

6.  Remove and immediately discard batteries from 

equipment not used for an extended period of time.

7.  Non-rechargeable batteries are 

not to be recharged.

8.  Do not force discharge, recharge, disassemble, 

heat above 140

°

 F or incinerate. Doing so 

may result in injury due to venting, leakage 

or explosion resulting in chemical burns.

 SAVe THeSe inSTRuCTiOnS.

Содержание BADLAND APEX 12000





















Отзывы: