13
FINAL INSTALLATION
1. Align the canopy (E) over the loose mounting bracket
screws (X) preassembled on mounting bracket
(D). Place the keyholes of the canopy (E) onto the
mounting bracket screws (X) and rotate the canopy
(E) clockwise.
2. Secure the canopy (E) with the mounting bracket
screws (X) previously removed (Step 4, page 8).
Tighten all mounting bracket screws (X) securely.
3. Partially insert the blade screws (BB) along with the
blade washers (CC) through the blade (K) and into
the blade arm (J). Tighten each blade screw (BB) with
a Phillips screwdriver (not included), starting with the
one in the middle. Repeat this step for the remaining
blades (K) and blade arms (J).
Hardware Used
BB
Blade Screw
x 15
Blade Washer
x 15
K
CC
BB
J
3
E
X
E
D
X
1
2
Note:
Closemount installation will not have the downrod (A), yoke cover (G), or canopy cover (F).
CC
