FINAL INSTALLATION
12
Locate BLUE and WHITE wires in fitter plate (D).
Connect WHITE wire from LED light kit (H) to
WHITE wire from fitter plate (D). Connect BLUE
wire from LED light kit (H) to BLUE wire from fitter
plate (D). Make sure molex connections are
secure.
Carefully arrange wires inside fitter plate (D).
Align slotted holes in LED light kit (H) with
loosened screws in fitter plate (D). Re-insert fitter
plate screw (F) previously removed. Tighten all
three fitter plate screws (F) securely.
6.
3
6
BLUE
WHITE
WHITE
BLUE
Loosened
Screws
H
D
F
Align slots on glass shade (E) with protrusions on
the inside of the fitter plate (D). Turn glass shade
(E) to the right (clockwise) until it no longer turns.
NOTE:
Pull down
gently
on the glass shade (E) to
make sure that it is secured completely.
7.
3
7
C
E
8
Remote Control
Bracket
Wall
8. If you wish to use the remote control bracket from
remote pack (L), install screws from remote pack (L)
through bracket and into the desired installation site.
The remote control transmitter from remote pack (L)
rests inside the bracket.
Bracket
Screws
Protrusions
D
