BLADE INSTALLATION (Continued)
WARNING
To reduce the risk of personal injury,
do not bend the blade holders when
installing, balancing the blades or
cleaning the fan. Do not insert foreign
objects in between the rotating blades.
NOTE: Periodically check blade holder hardware
and resecure if necessary.
Hardware Used
BB
Washer-Head
Screws
CC
Fiber
Washers
x 18
Hardware Used
AA
Screws
x 12
x 18
2. Position the blade (H) over the blade holder
(G) with threaded posts showing. Make sure
the bottom edge of the blade (H) is fully seated
against the blade arm. With a Phillips
screwdriver, tighten washer-head screws (BB)
with fiber washers (CC) to secure the blade to
the blade arm. (Fig. 2)
3. Attach blade holders (G) to the motor hub
using the screws (AA). (Fig. 3)
2
CC
BB
G
H
3
AA
A
G
B
1. Disassemble the housing switch cup assembly
(B) by removing three preassembled screws.
(Fig. 1)
1
HOUSING SWITCH CUP/ADAPTER ASSEMBLY INSTALLATION
14
