FINAL INSTALLATION
Connect WHITE molex wire from switch housing to
WHITE molex wire from light kit fitter (R). Connect
BLUE (or BLACK) molex wire from switch housing
to BLACK molex wire from light kit fitter (R). Make
sure molex connections are secure.
5.
14
Lowes.com/harborbreeze
Locate motor screws (I) and lock washers (K) that
were previously removed (Step 5, page 7).
Insert two motor screws (I) along with lock washers
(K) through one blade arm (G) to attach blade arm
(G) to motor housing (D). Tighten motor screws (I)
securely. Repeat with remaining blade arms (G),
making sure to completely secure each blade arm
(G) before proceeding with the next.
If you do NOT wish to use the light kit
, skip to
Step 9.
If you DO wish to use the light kit
, proceed to
Step 4.
3.
4a. Remove three light kit fitter screws (Q) from light kit
fitter (R).
Remove three switch housing screws (P) from
switch housing on motor housing (D) and remove
switch housing cap (O). Locate BLUE (or BLACK)
and WHITE wires in switch housing labeled FOR
LIGHT KIT CONNECTION and remove plastic that
holds these two wires together.
4b.
4a
R
Q
Q
F
G
I
K
3
4b
D
R
5
Molex
Connections
D
Switch
Housing
White
Blue
(or Black)
O
P
Switch
Housing
P
D