Problem
Solution
There may be a power failure. Test if the power supply works by
connecting another appliance.
The tanning lamps may still be too hot to go on. Let them cool
down for 3 minutes first.
The overheat protection may have switched off the appliance
automatically because it overheated. Remove the cause of
overheating (e.g. a towel that blocks one or more vents). Let the
appliance cool down for a while and then switch the appliance
back on.
The fuse of the circuit
to which the appliance
is connected cuts off
the power when I
switch on or use the
appliance.
The fuse of the circuit to which the appliance is connected must be
a 16A standard fuse or a slow-blow automatic fuse. You may also
have connected too many appliances to the same circuit.
The tanning results are
not as good as I
expected.
You may have followed a tanning course that is not appropriate for
your skin type. Check the table in chapter ‘Tanning and your
health’, section ‘Tanning sessions: how often and how long?’.
The distance between the lamps and the surface you lie on may be
larger than prescribed. See chapter ‘Preparing for use’.
When the lamps have been used for a long time, the tanning
capacity decreases. This effect only becomes noticeable after
several years. To solve this problem, select a slightly longer tanning
time or have the lamps replaced.
ENGLISH
10
Содержание Mobile Sun HP8540
