3
4
Suffix code
Model
Code
Information
TPR-3SL
-
Slim type 3-phase power regulator
Rated current
040
40 A
055
55 A
070
70 A
090
90 A
130
130 A
160
160 A
Power supply voltage
L
100 - 240 V AC (Low)
H
380 - 440 V AC (High)
Option
-
FUSE is installed
N
No Fuse
※ Circuit and FAN need 100 - 240 V AC voltage power separately.
Specification
Model
Low
TPR-3SL040L
TPR-3SL055L TPR-3SL070L TPR-3SL090L TPR-3SL130L TPR-3SL160L
High
TPR-3SL040H TPR-3SL055H TPR-3SL070H TPR-3SL090H TPR-3SL130H TPR-3SL160H
Power supply voltage
100 - 240 V AC (Low)
380 - 440 V AC (High)
Circuit input power
100 - 240 V AC
Power frequency
50 Hz / 60 Hz (Dual usage)
Rated current
40 A, 55 A, 70 A, 90 A, 130 A, 160 A
Applying load
Resistive load
Control
Input
Current input
4 - 20 mA DC (Impedance : 100 Ω)
Voltage input
1 - 5 V DC
Contact input
ON / OFF
External V.R
External volume (10 ㏀)
Control method
Phase control, Fixed Cycle control, Variable Cycle control, ON/OFF control
Movement type
SOFT START, SOFT UP/DOWN
Output voltage
More than 98 % of the power supply voltage (In case of maximum current input)
Cooling method
Natural cooling (40 A, 55 A), Forced cooling (70 A, 90 A, 130 A, 160 A)
Display method
Display by LED
Insulation resistance
Min 100 MΩ (Base on 500 V DC mega)
Output control range
0 ~ 100 %
Dielectric strength
3000 V AC 50/60 Hz for 1 min
Line noise
Noise by noise simulator (2,500 V)
Ambient temperature
0 ~ 40 ℃ (Without Condensation)
Ambient Humidity
30 ~ 85 % RH
Storage temperature
-25 ℃ ~ 70 ℃
Weight
4,044 g
4,324 g
9,100 g
Appearance
[Unit : mm]
Connection diagram
▒ Connection diagram of load terminal
▒ Connection diagram of signal and alarm terminal
INPUT
LOAD
· Inside of TPR, the fuse is installed in the R,S,T input power supply
portion depending on the specification of options
· When connecting terminals, please use crimp connectors and
securely fasten them due to the high current flow.
(Max space for solder less terminal connection is
40/55/70 A : 16 mm, 90/130/160 A : 26 mm)
• No. ①, ② and ③ : manual V.R
· Use variable resistor of 10 ㏀
· Control 0 ~ 100 % manually
• No. ④ and ⑥ : RUN/STOP
· Be sure to attach RUN contact while it is operating.
• No. ⑤ and ⑥ : ON/OFF control
· When inputting contact, it is operated with 100% output,
irrespective of other control input.
• No. ⑦, ⑧ and ⑨ : Alarm 1 - Warning
This is a “warning” alarm which implies that there may be a
cause of damage to the product and load. At this moment,
TPR stops the output by itself and “warning” alarm is activated.
· Warning error : Overcurrent, SCR short-circuit,
Fuse Disconnection, Power problem
• ⑩, ⑪, ⑫: Alarm 2 (Caution)
This is a “caution” alarm which implies there is not a serious
problem, but user needs to check for its system because small and
minor problems cause this alarm. At this moment, the output of TPR
is normally operating but only “caution” alarm is activated.
· Caution error : Load unbalance, load disconnection,
overheated heat (65 ℃)
• Initially ⑦ & ⑧ connect. If alarm 1 is activated, ⑧ & ⑨ will be connected.
• Initially ⑩ & ⑪ connect. If alarm 2 is activated, ⑪ & ⑫ will be connected.
MB0601KE140806
Power REGULATOR
TPR-3SL
Thank you for purchasing HANYOUNG product.
Please check whether the product is the exactly same as you ordered.
Before using the product, please read this instruction manual carefully.
Please keep this manual where you can view at any time
28, Gilpa-ro 71beon-gil, Nam-gu, Incheon, Korea
TEL : (82-32)876-4697 FAX : (82-32)876-4696
http://www.hynux.com
HANYOUNGNUX CO.,LTD
HEAD OFFICE
JL.CEMPAKA BLOK F 16 NO.02 DELTA SILICON II INDUSTRIAL PARK
LIPPO CIKARANG CICAU, CIKARANG PUSAT, BEKASI INDONESIA 17550
TEL : 62-21-8911-8120~4 FAX : 62-21-8911-8126
PT. HANYOUNG ELECTRONIC INDONESIA
INDONESIA
FACTORY
INSTRUCTION MANUAL
•Please install appropriate protective circuit on the outside if malfunction or an incorrect operation may be
a cause of leading to a serious accident.
•If you use the product with methods other than specified by the manufacturer, there may be bodily injuries
or property damages.
•Since this product is not designed as a safety device if it is used with systems, machines and equipment
that could lead to a risk of life or property damage, please implement safety devices and protections for
both lives and the applications and plan for preventing accidents.
•To prevent damage or failure of this product, please supply the rated power voltage.
•To prevent electric shock or equipment failure, please do not turn on the power until completing wiring.
•Never disassemble, modify, or repair the product. There is a possibility of malfunction, electric shock,
or a risk of fire.
•Please turn off the power when mounting / dismounting of the product. This is a cause of electric shock,
malfunction, or failure.
Warning
Safety information
Before using the product, please read the safety information thoroughly and use it properly.Alerts declared in the manual
are classified to Danger, Warning and Caution by their criticality
DANGER
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury
To prevent electric shock while it is running, put to earth with the fixed screw of the unit and do not touch the radiator
panel since it is very hot. Do not touch or contact the input/output terminals because they cause electric shock.
Danger
•Since the product operating environment influences the product performance and expected life span,
please avoid using in the following places.
· a place where humidity is high and air flow is inappropriate.
· a place where dust or impurity accumulates, ambient temperature is high and vibration level is high.
· a place where corrosive gas (such as harmful gas, ammonia, etc.) and flammable gas occur.
· a place where there is direct vibration and a large physical impact to the product.
· a place where there is water, oil, chemicals, steam, dust, salt, iron or others (Contamination class 1 or 2).
· a place where excessive amounts of inductive interference and electrostatic and magnetic noise occur.
· a place where heat accumulation occurs due to direct sunlight or radiant heat.
•Please do not wipe this product with organic solvents such as alcohol, benzene and others. (Please use mild detergent)
•Please make sure to inspect the product if exposed to water since there is a possibility of electric leakage or a risk of fire.
•Please connect the product and other units after turning off all the power of the product, instruments and units.
•Please make sure that the power control (TPR) is installed perpendicularly.
•Please install the product inside of the control panel and install an exhaust fan onto the top of the control panel.
•Pay attention to the edge of heat sink which is sharp.
Caution
▒ 40/55/70 A
▒ 90/130/160 A
223 (H1)
237 (H2)
110
2-50
4-6.5
4-
8
194.6
213.7
200
239.1
220.5
300.5
30.5
125
230
160
173
270
6-8.5
223 (H1)
237 (H2)
110
2-50
4-6.5
4-
8
194.6
213.7
200
239.1
220.5
300.5
30.5
125
230
160
173
270
6-8.5
H1
H2
70 A (With cooling fan)
249.5 mm
263.5 mm