1
2
Safety information
※ Please refer to manual which is registered in website
for more information (www.eng.hynux.com)
Please read warnings and safety carefully before using it.
The manual is distinguished by danger, warning, and caution.
•The content of the manual can be changed without prior notice.
•Please check outspecifications of the product you order.
•Please check out if the product is broken out during the transport.
•Please use it within a temperature range from -10 to 60℃ (Max 50℃ when installed tightly)
/ humidity 35~90% R.H.
•Please use it in a place where there is no corrosiveness gas (especially, noxious gas, ammonia etc.) and
combustible gas.
•Please use it in a place where main body cannot be damaged or vibrated directly.
•Please use it in a place (pollution rate 1 or 2) where there are no water, oil, medicine, steam, dust, salt, and iron.
•Please avoid the place where induced lesion is large and static and magnetic noise appears.
•Please check when it got into the water because there is a danger of fire and short circuit.
•For input signal line, please avoid a load line, a power line and a power wire to protect from the impact of
induction noise.
•Please separate input and output signal line each other, and if it cannot separate, please use a shield line
for input signal line.
•When there is a lot of noise from power supply, we encourage you to use an insulation transformer and
noise filter
•We encourage you to repair regularly for using this device safely and continuously.
•There are endurance oneand aged deterioration in the component of this device.
•The guarantee period for this device including the components is one year if you are using it regularly.
•A-class instrument (information and communication instrument for business use)
“This instrument for business use (A-class) is registered as an electromagnetic capability instrument so that
users or sellers should pay a close attention to this and please use it outside the house.”
•In a case of a serious accident by the device’s malfunction, you must install a protection circuit outside.
•Since a power switch and fuse are not installed in this device, you must install them outside separately.
•In order to prevent from damage and malfunction, please supply a power voltage for the right rating.
•In order to prevent from electric shock and malfunction, please do not turn on the power until all wirings
are terminated.
•Since its construction is not explosion-proof construction, please do not use it in the place where an
explosive gas exists.
•Please do not dissemble, manufacture, reform, and fix it. There is a danger for disorder, electric shock, and fire.
•Please detach it after power is off. It can be a cause for electric shock, defection, and false operation.
•If you are not using the way manufactures has indicated, it will bring a serious injury or damage for property.
•Because there is a danger for electric shock, please use it in a condition where panel is installed while
current is flowing
•If you are using the device which could bring a wound or damage to theproperty, you should install safe
device to prevent from the accident.
•It is necessary for having a proper back-up system and safe device to prevent damage from system’s defect,
death or property. It is a user’s responsibility for protection about the resultcaused by the system’s malfunction.
•The device is a product which is not approved as medical or life-support system
Since input and output terminals have a possibility to bring an electric shock, please do not contact with water
Warning
Danger
Caution
MCV0201E140421
It indicates an emergency situation which brings a death or serious injury if you don’t follow it.
It includes a content to indicate a possibility for death or a serious injury if you don’t follow it.
It includes a content to indicate a possibility to bring a slight wound or damage to property if you don’t follow it.
Danger
Warning
Caution
Specification
•It is easy to set up and change a network configuration with using RS-232 (Serial Port)
•Serial devices without network connection function (RS-232/RS-485/RS-422) can be used with
connecting to network so that telemanagement through network is possible for various serial devices.
•Internet’s connecting function for HMCE-103 can support open type network protocol like TCP/IP, and it
can be used in superhigh speed network or existing LAN.
•HMCE-103 is designed to have the general requirement such as all sorts of industrial automation device
and medical market.
•HMCE-103 is Ethernet port 2 serial communication device with a high competitive price.
(Up to maximum 3 clients are available for access)
Specification
Serial communicationis a standard device which can be used in almost all devices including PC.
This is a way how one beat is transmitted in order at a time. It is simple but, it has a limit in
transmission distance and it is hard to keep the maintenance.
A product which can connect to the serial communication device through Internet is HMCE-103.
TCP/IP Protocol should be used for data communication through Internet and HMCE-103 can
deal with the transformation process.
RS-232, RS-485, and RS-422 communication are available in HMCE-103. Also, it is easy for
applying to user system since RJ45 connector is equipped in the device.
Outline
HEAD OFFICE
HANYOUNGNUX CO.,LTD
28, Gilpa-ro 71beon-gil, Nam-gu, Incheon, Korea
TEL : (82-32)876-4697 FAX : (82-32)876-4696
http://www.hynux.com
Jl. cempaka blok F16, No.02 Delta Silicon II
Cikarang Bekasi Indonesia
TEL : 62-21-8911-8120~4 FAX : 62-21-8911-8126
INDONESIA
FACTORY
PT. HANYOUNG ELECTRONIC INDONESIA
Ethernet_to_Serial Converter
HMCE-103
Thank you for purchasing HANYOUNG product.
Please check whether the product is the exactly same as you ordered.
Before using the product, please read this instruction manual carefully.
Please keep this manual where you can view at any time
INSTRUCTION MANUAL
Model
HMCE-103
CPU
PIC32MX695F512L
Memory
SRAM : 128 Kbit, Flash : 512 Kbit
Input Voltage
5 V d.c. (±10 %)
Maximum Current
Maximum under 200 mA
RS-232
Communication
Data communication / Serial console Male DB9 Serial Port
Communication speed : 2400 ~ 115200 bps
Flow control : None
Signal : TX, RX, GND
RS-485
Communication
For 2 and half wires and duplex method for data communication
Communication speed : 2400 ~ 115200 bps
Flow control : DE/RE
Signal : TX+, TX-
RS-422
Communication
4 wires and duplex method for data communication
Communication speed : 2400 ~ 115200 bps
Flow control : None
Signal : TX+, RX+, TX-, RX-
Ethernet
Communication
10/100 Base-T Ethernet (RJ-45 Connector )
Fixed and fluid IP support
It is possible to access a lot of Clients (maximum 3 devices)
ARP, IP/ICMP, TCP, Telnet, DHCP
Configuration
Telnet or Serial Console Interface
LED
Power Supply Input mark
Activating Condition Mark
Weight
74g
Ambient Temperature
-10 °C ~ 60 °C
Storage temperature
-30 °C ~ 80 °C
Certification Standard
KCC-REM-NUX-HMCE-103
Warranty period
1 year
Components
Main body
Power supply cable
Communication cable
Application Diagram
GR200 Recorder
(Serial Communication)
GR200 Recorder
(Serial Communication)
HMCE-103
HMCE-103
HUB
HUB
CLIENT
CLIENT
▒ Application of LAN
▒ Connection between Serial device and Client
