Hanwha Vision QNO-C8083R, Руководство пользователя

Страница: 11 / 37

English _
11
!
OUTDOOR V
ANDAL DOME CAMERA
INSTALLATION
J
`
This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are
recommended to install this product below the edge of eaves to prevent the cable from being externally exposed.
Precautions before installation
Ensure you read out the following instructions before installing the camera:
~ Select an installation site that can hold at least 5 times the camera’s weight.
~ Stuck-in or peeled-off cables can cause damage to the product or a fire.
~
For safety purposes, keep anyone else away from the installation site.
And put aside personal belongings from the site, just in case.
~ If the product is installed with excessive force, it may cause damage to the camera due to malfunction.
Forcing assembly using non-compliant tools may damage the product.
Removal
1.
Remove the dome cover by turning the dome cover’s fastening screws counterclockwise.
` It is not required to completely remove screws from the cover.
4x
TR20
2.
Remove the camera body by turning the mount plate fastening screws counterclockwise.
` Note that it is not necessary to loosen the screws completely.
2x
TR20