Hanwha Vision QND-7022R, Руководство пользователя

Страница: 23 / 40

English _
23
!
INST
ALLA
TION & CONNECTION
INSERTING/REMOVING A MICRO SD CARD
J
`
Before installing the camera, the Micro SD card should be inserted while the power source and the body are separated.
` Do not forcefully insert it in the reverse direction. It might damage your Micro SD card and your product.
` When it rains or the humidity is high, insertion or ejection of a Micro SD card is not recommended.
` Disassembly of the product cover should be finished within 5 minutes, or there will be the risk of internal dew condensation.
Inserting a Micro SD card (QNO-6014R/7012R/7022R/7032R/6084R/7082R)
1. Turn the front cover to the UNLOCK [ ] direction.
2. Pull and separate the front cover.
3. Insert a Micro SD card in the arrow direction shown in the figure.
Adjusting the monitoring direction for the camera
(QND-7012R/7022R/7032R/7082R, QNV-6014R/7012R/7022R/7032R/6084R/7082R)
` Adjusting the monitoring direction
You can adjust the camera direction only when the camera is fixed on the ceiling.
Where, rotating the camera unit to the left or right is called Pan, adjusting the tilt is called Tilt, and turning the
lens on its axis is called Rotation.
- The effective range of pan is a total of 350 degrees.
- The effective range of rotation is a total of 355 degrees.
- The effective range of tilt is a total of 67 degrees.
J
`
The image can be covered up by the camera case depending on the angle.
`
Do not forcefully turn the focus/zoom lens after the dome case is disassembled.
Otherwise, it may cause an incorrect focus due to a motor failure.
`
Methods of adjustment
1. After installing the camera, adjust the panning angle in consideration of the monitoring direction.
2. Set the horizontal angle so that the image is not reversed.
3.
Adjust the tilt angle so that the camera faces toward the monitoring object.
5. AUDIO IN
3.4. GND
2.ALM OUT
1.ALM IN
RESET
DC12V
3.AUDIO IN
2.ALM OUT
.ALM IN
VIDEO
1 2 3
4 5 GND
RESET
Pan
Tilt
Lens rotation
RESET
RESET RESET
<QNO-6014R/7012R/7022R/7032R>
<QNO-6084R/7082R>