Hanwha Techwin Wisenet SPD-152 Скачать руководство пользователя страница 20

Страница: 20 / 66

20_

live

Icons on the live Screen

You can check the status or operation with the icons on the live screen.

￭

The icons displayed on the screen may differ depending on the type of camera and the user's authority.

Menu title

Functions

Camera name

Displays the camera name.

●

For multichannel cameras, the channel number is displayed. The channel number may not
be displayed depending on the camera.

Video input status

It is displayed when there is no input while the camera is on.

Displayed when the resolution of the live video exceeds the supported range while the
camera is on.

Displayed when the camera is not registered.
If you set the channel setup to <

Covert 2

>, nothing will be displayed on the Live screen.

￭

If you set it to <

Covert 1

>, the video will not be displayed on the Live

screen, and only the OSD will be displayed.

Status Display

It is displayed on the channels that can enable the PTZ mode.

Displays audio On/Mute.
It will not be displayed when <

Off

> is selected for the audio in the channel setup.

It is displayed when it fails to decode all the frames due to limited decoding performance
and in this case, only the I-Frame is decoded.

Displayed if the Wisenet camera's certificate is valid.

￭

The '

Live4NVR

' profile is added automatically with network camera auto registration, and settings can be changed according to the user

environment.

￭

Depending on camera specification, you may not be able to add a profile or if you have the PLUGINFREE profile, you will not be able to add the
Live4NVR profile.

￭

When the system is overloaded and the performance is down, the network camera may play only the main frame(I-frame).

￭

To set profiles, see the "

Setup

Setting the Camera

Profile setup

” page in the table of contents.

OSD Information Display

To show or hide the OSD information, click <

> at the bottom of the screen.

Содержание Wisenet SPD-152



































































Результаты поиска

Содержание Wisenet SPD-152

Отзывы:

Бренды по названию

Популярные бренды

Hanwha Techwin Wisenet SPD-152, Руководство пользователя

Результаты поиска

Содержание Wisenet SPD-152

Отзывы:

Бренды по названию

Популярные бренды