Hanwha Techwin Wisenet SPD-152, Руководство пользователя

Страница: 10 / 66

10_
connecting
connecting
CONNECTINg TO AN ExTERNAl DEVICE
NETWORK
1
2
FRON
T
USB
VIDEO
DC 12V
RESET 1 2 3
4 5 6
7
HDMI OUT HDMI OUT
Network
Microphone
Camera
￭
Unrated or improper power source may cause damage to the system. Ensure that you use only the rated power source before connecting power to the
system.
CONNECTINg A USb DEVICE
1.
On the front of the product, there is a USB port.
2. You can connect a USB memory or mouse to the USB port.
3.
The product supports a hot-plugging function that enables connecting/disconnecting USB devices while operating
the system.
￭
Some USB devices may fail to function properly due to compatibility issues, please check the device before using it.
￭
If the USB memory is not detected, try formatting it on the "
Setup
>
System
>
System management
>
Settings
" menu.
￭
Only USB storage devices that comply with the standards (having a metal cover) are guaranteed for data transfer.
￭
In case the USB device’s electric contacts have been worn out, data transfer between the devices may not properly function.
CONNECTINg TO pOWER
When using a common ethernet cable, please connect to the power adapter for a power supply.
Connect the (+,-) wires of the power adapter to the power input port of the network video decoder using a screwdriver.
Power
Connecting to a power Source with Ethernet
You can supply power separately from the PoE switch without connecting to the power adapter.
●
Please see below for PoE power specifications.
– Power in use: PoE(IEEE802.3af)
Ethernet
￭
When the PoE and DC 12V is powered on at the same time, the device operates with external power (DC 12V).
– If you connect to a PoE-enabled router, you can use the product without connecting to a separate power source.
– For the PoE, use equipment that supports the IEEE 802.3af standard.
￭
Please be careful when connecting as DC 12V adapter has polarity.
￭
When connecting to external devices, be sure to power off the connected device before connecting.
￭
Connect the set and the adapter power line before connecting to a 220V wall socket.
￭
Do not extend the adapter output cable.
￭
Please contact the service center when you need to extend the power cable.
connecting