Hanwha Techwin Wisenet SMT-3240, Руководство пользователя

Страница: 9 / 17

English _9
!
INST
ALLA
TION
installation
Please take note of the followings before using this product.
~
Do not use the product outdoor.
~ Do not spill water or liquid in the connection part of the product.
~
Do not impose the system to excessive shock or force.
~ Do not pull out the power plug forcefully.
~
Do not disassemble the product on your own.
~ Do not exceed the rated input/output range.
~ Use a certified power cord only.
~
For the product with an input ground, use a grounded power plug.
BEFORE INSTALLING THE PRODUCT
Ventilation requirement
If the product is installed in a poorly ventilated area, it might be damaged due to the temperature rising inside
the product.
Ensure there is enough space around the product before installation.
Vertical wall mount condition
A. Minimum 40 mm
B. Ambient temperature Measuring point <35°C
10cm
10cm 10cm
10cm
Installation conditions for standing monitors
10cm
10cm
10cm 10cm
ASSEMBLING THE STAND
Before assembling the product, make sure that its screen is facing down when placing it on a flat and safe surface.
Place the product on a soft cloth or product wrapping paper to protect it before installation.
1. After attaching the connection part and the base of the stand, fix them
firmly with screws under the base.
2. Before assembling the stand, align the groove of the connection part with
the groove on the monitor to assemble them after removing the screws from
the back of the monitor.
3. Firmly fix it in place with the screw removed from the back of the monitor.