Hanway XRAY125S 2019, Руководство по эксплуатации

Страница: 24 / 43

Inspection before Riding
21
2. Crack, Damage, Foreign Object and Abnormal Wear
3. Check the surface of the tire:

Is there any obvious damage?

Are there any nail, stone, glass and etc in the tire or in the tread?

Is there any abnormal wear?
Inspecting the Quantity of Fuel
Make sure that the fuel is enough to reach the destination or not. Turn
the ignition switch to ON position, if the fuel gauge hands points to the red
region, the fuel should be refilled as soon as possible.
Inspecting the Quantity of Engine Oil
Refer to page 27, to check the engine oil.
Inspection of the Ignition Unit and the Lights
Start the engine, turn on the headlamp switch, and check if the
headlight and the rear light are on.
Operate the front and rear brake separately, and check if the brake
light is on.
Operate turning signal lamp switch, and check if the turn signal lights
work normally.
Inspecting the Rear Mirror
Check to see if objects to the rear and both sides can be seen clearly
from the rear view mirrors when seated in the rider's normal position.
Check if the rear mirror is clean and free from damaged check
tightness on the handlebar mounting.
Inspecting the Reflectors and the License Plate
Check that the license plate and the reflectors are not dirty or
damaged.
Check that the license plate is fixed securely and that the registration
number is clearly visible.
Inspecting the Chain Tightness
Keep chain adjusted and lubricated 15mm (3/5in) freeplay, There has
a decal on the chain cover.