Hanway XRAY125S 2019, Руководство по эксплуатации

Страница: 17 / 43

Functions of Controllers
14
Throttle grip
⑨
is used to control engine speed. Turn it towards you
to increase engine speed; Turn it away from you to decrease the engine
speed.
Gear Shifting
This model of motorcycle is equipped with a five-shift gear-in
transmission system. The working order of the gearshift is as shown in the
fig.
The lever is connected to the ratchet of the gearshift. It will return
automatically to its original position after selection of a certain gear so that
it is possible to change to the next gear. The neutral gear is located between
the bottom and second gears. In the neutral mode, press the lever and the
low gear will be engaged, each time the lever is shifted up, a higher gear is
engaged. With the Ratchet mechanism, only one upper or lower gear is
engaged each time. When you shift the gear from the low position to the
second position or from the second position to the low position, slide over
the neutral position without stop. If the neutral gear is desired, stop
between the bow gear and the second gear, thus getting in the neutral gear.
Side Stand
To use the main, depress it by foot and lift the rear of the motorcycle
until the rear wheel is lift. To use the side, depress the end of it until it
rotates to the end and stops.