Basic Operation
DSO1000BV Series HandHeld Oscilloscope User Manual 37
Options
Settings
Comments
Type
Vectors
Dots
Vectors fills up the space between adjacent sample
points in the display; Dots only displays the sample
points.
Persistency
OFF
0.2S-8S selectable
Infinite
Sets the time length to display each displayed
sample point.
DSO Mode
YT
XY
YT format shows the vertical voltage in relation to
time (horizontal scale); XY format displays a dot
between CH1 and CH2 each time when a sample is
acquired, where the voltage or current of CH1
determines the X coordinate of the dot (horizontal)
and the voltage or current of CH2 determines the Y
coordinate (vertical). For detailed information, refer
to descriptions on XY format in the following text.
Contrast
0-15 16 ranks adjustable.
Grid
Dotted line
Real line
OFF
Off only displays the horizontal and vertical
coordinates at the center graticule on the screen.
Grid Intensity
0-15 16 ranks adjustable.
Refresh Rate
Auto
50 Frames
40 Frames
30 Frames
Wave Bright
0-15 16 ranks adjustable.
BL Keep
5s,10,30s,60s,Unlimited
Menu Keep
5s,10,30s,60s,Unlimited
5.6 Fast Action Buttons
AUTO:
Automatically set the oscilloscope controls to generate a usable display of the input signals.
Refer to the following table for relative content.
RUN/STOP:
Continuously acquire waveforms or stop the acquisition.
5.6.1 AUTO
Autoset is one of the advantages digital oscilloscopes have. When you push the AUTO button, the
oscilloscope will identify the type of waveform (sine or square wave) and adjust controls according
to input signals so that it can accurately display the waveform of the input signal.
Functions
Settings
Acquire Mode
Adjusted to Normal or Peak Detect
Cursor
Off
Display Format
Set to YT
Display Type
Set to Vectors for an FFT spectrum; otherwise, unchanged
Horizontal Position
Adjusted
