Page EN-23
Installation, connection and commissioning
Choose a suitable location
CAUTION!
Risk of injury!
The appliance is heavy and bulky. Im-
proper handling of the appliance may
result in injury.
■
Seek the help of another person dur-
ing transport, installation and assem-
bly.
■
If a trolley is used to move the appli-
ance, the appliance must be moved
as shown on the packaging.
■
Only lift the appliance as shown on
the packaging.
■
Remove all obstacles on the transport
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– In order to install the connection pipes, the
dishwasher must be positioned near to a
washing/dishwashing basin.
Setup
You can position the dishwasher in two man-
ners:
– as a freestanding appliance in the room.
The space required for this corresponds to
the appliance measurements cited in the
following diagram.
– built under a worktop. In this case, you
must take the required recess dimensions
into consideration.
Continue with ‘Connect outlet hose’.
Installation, connection and commissioning
448 mm
600 mm
845 mm
Appliance measurements
1. If you have not already done so, remove
cardboard, polystyrene and adhesive
strips from the inside of the dishwasher.
2. Place the dishwasher in the desired posi-
tion.
(31)
3. In order to compensate for uneven floor
surfaces and set up the dishwasher on
a level horizontal base, you can screw
the four adjustable feet (31) in or out. The
adjustable feet have slots all around their
circumference. Insert a screwdriver and
use it to turn the adjustable foot. Use a
spirit level to align the dishwasher.
Содержание 609123
Страница 70: ......