Hans Grohe Vernis Blend Showerpipe 200 1jet 26274000 Скачать руководство пользователя страница 4

Страница: 4 / 44

English

Assembly

(see page 32)

Safety Notes

Gloves should be worn during installation to prevent crushing and cutting

injuries.

The product may only be used for bathing, hygienic and body cleaning

purposes.

The arm of the shower head is intended only to hold the shower head. Do not

load it down with other objects!

Children as well as adults with physical, mental and/or sensoric impairments

must not use this product without proper supervision. Persons under the

influence of alcohol or drugs are prohibited from using this product.

Do not allow the streams of the shower touch sensitive body parts (such as your

eyes). An adequate distance must be kept between the shower and you.

The product may not be used as a holding handle. A separate handle must be

installed.

The hot and cold supplies must be of equal pressures.

Installation Instructions

• Prior to installation, inspect the product for transport damages. After it has been

installed, no transport or surface damage will be honoured.

• The pipes and the fixture must be installed, flushed and tested as per the

applicable standards.

• The plumbing codes applicable in the respective countries must be observed.
• The installation dimensions stated in these installation instructions are ideal for

people of approximately 1800 mm in body height. The dimensions can be

altered if required. In this case, pay attention to the fact that a change of

installation height will also change the minimum height, and that the altered

mounting dimensions must be taken into consideration.

• During installation of the product by qualified trained personnel, make sure that

the entire fastening surface is even and smooth (no protruding seams or tile

offset), that the finish of the wall is suitable to apply the product and has no

weak points.

• The premounted dirt collection screen must be used to prevent dirt from entering

through the pipes. Dirt entering can affect the function and/or lead to damage

to the functional components of the fitting. Hansgrohe will not be held liable for

any resulting damage.

• The product is not designed to be used with steam baths!
• If the continuous water heater causes any problems, or you have different water

pressures you must install a water limiter to the cold supply, (ordered separate-

ly,article number 97510000).

Technical Data

Operating pressure:

max. 1 MPa

Recommended operating pressure:

0,1 - 0,5 MPa

Test pressure:

1,6 MPa

(1 MPa = 10 bar = 147 PSI)

Hot water temperature:

max. 60°C

Centre distance:

150±12 mm

Connections G 1/2:

cold right - hot left

• Safety against backflow
• The product is exclusively designed for drinking water!

Symbol description

Do not use silicone containing acetic acid!

Safety Function

(see page 33)

The desired maximum temperature for example max. 42º C can be pre-set thanks

to the safety function.

Adjustment

(see page 33)

After the installation, the output temperature of the thermostat must be checked. A

correction is necessary if the temperature measured at the output differs from the

temperature set on the thermostat.

Thermal disinfection

(see page 34)

Thermal disinfection pursuant to process sheet DVGW W 551 (≥ 70°C / > 3 min)

must only be carried out by qualified personnel.

Maintenance

(see page 42)

• The check valves must be checked regularly according to EN 806-5 in

accordance with national or regional regulations (at least once a year).

• To guarantee the smooth running of the thermostat, it is necessary from time to

time to turn the thermostat from total hot to total cold.

Dimensions

(see page 38)

Flow diagram

(see page 38)



Overhead shower



Hand shower



Bath Spout

Spare parts

(see page 40)

Special accessories

(see page 40)

order as an extra

• tile-matching-disk #93813000; 93813670

• pipe 845 mm #93906XXX; #93906670

• pipe 945 mm #93770XXX; #93770670

Cleaning

(see page 36)

Operation

(see page 35)

To empty the overhead shower after use, hold it in a slightly inclined position.

Test certificate

(see page 44)

Fault

Cause

Remedy

Insufficient water

- Supply pressure inadequate

- Check water pressure (If a pump has been installed

check to see if the pump is working).

- Regulator filter dirty

- Clean filter in front of the mixer and on the MTC-ther-

mo cartridge

- Shower filter seal dirty

- Clean filter seal between shower and hose

Crossflow, hot water being forced into cold water

pipe, or vice versa, when mixer is closed

- Backflow preventers dirty or leaking

- Clean backflow preventers, exchange if necessary

Spout temperature does not correspond with

temperature set

- Thermostat has not been adjusted

- Adjust thermostat

- Hot water temperature too low

- Increase hot water temperature to 42 ºC to 60 ºC

Temperature regulation not possible

- thermo cartridge calcified

- Exchange thermo cartridge

Instantaneous heater didn't work with thermostat

- Filters are dirty

- Clean the filter / exchange filter

- check valve hasn't moved back

- Exchange check valves

- Flow limiter in handshower isn’t removed

- Remove flow limiter

Содержание Vernis Blend Showerpipe 200 1jet 26274000













































Результаты поиска

Содержание Vernis Blend Showerpipe 200 1jet 26274000

Отзывы:

Похожие инструкции для Vernis Blend Showerpipe 200 1jet 26274000

Бренды по названию

Популярные бренды

Hans Grohe Vernis Blend Showerpipe 200 1jet 26274000, Инструкция по использованию/Инструкция по сборке

Результаты поиска

Содержание Vernis Blend Showerpipe 200 1jet 26274000

Отзывы:

Похожие инструкции для Vernis Blend Showerpipe 200 1jet 26274000

Бренды по названию

Популярные бренды