4
Cleaning
(see enclosed brochure)
Spare parts
(see page 11)
Operation
(see page 10)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Flow diagram
(see page 9)
Dimensions
(see page 9)
Do not use silicone containing acetic acid!
Symbol description
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The shower system may only be used for bathing,
hygienic and body cleaning purposes.
The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be oberserved.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 – 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80°C
Recommended hot water temp.:
65°C
Thermal disinfection:
max. 70°C / 4 min
The product is exclusively designed for drinking water!
English
Assembly see page 6
Содержание Talis S 32310010
Страница 6: ...6 1 1 1 2 2 2 7 Nm 1 2 1 2 3 4 5 ...
Страница 7: ...7 7 Nm 2 SW 19 mm 1 2 3 4 SW 10 mm SW 19 mm 8 Nm SW 24 mm 8 Nm 1 6 7 8 9 10 11 ...
Страница 8: ...8 2 min 12 13 14 ...
Страница 10: ...10 abrir abierto open öffnen fechar cerrar close schließen quente caliente hot warm fria frío cold kalt ...