Hans Grohe Quattro 13932180, Инструкция по эксплуатации

Страница: 6 / 14

Assembly
1. Flush through the supply pipes.
2. Mount the main body in such a way that the
front edge of the tiles rests between the ridges
on the protective cover.
Depth of mounting 50 - 95 mm; Extension set
40 mm No. 92630000. The inlet is marked
by an arrow on the front of the main body; the
way the other connections are made is left to
the fitter.
3. Attach protective cover.
Attention!
The four way diverter should in no case be used as a
stop valve. If only two outlets are used, the third one
has to be connected to one of the other ones.
Final assembly
Finish set for Mondaro No. 18933 + colour code
Finish set for Terrano No. 37930/37933+colour c.
Finish set for Starck No. 10933 + colour code
Finish set for Arco No. 16933 + colour code
Finish set for Uno No. 13931 + colour code
Finish set for Carlton No. 17933/17935+colour c.
Finish set for Steel No. 35933800
Finish set for Azzur No. 34933 + colour code
Finish set for Allegroh No. 36933 + colour code
Finish set for Mondial/Metropol/Metris/Talis
Elegance/Talis Sportive No. 15935 + colour code
English
Operation
Selection of outlet is made by turning the head. To
change from one outlet to the other, turn the head
through 120°.
Technical Data
Operating pressure: max. 10 bars
Recommended operating pressure: 1 - 5 bars
Test pressure:
16 bars
Hot water temperature: max. 80° C
Connection dimensions: G ¾"
Recommended hot water temp.: 65° C
Rate of flow by 3 bars: 65 l/min
Spare parts
1 Diverter system 13937000
2 Extension set 40 mm 92630000