4
English
Assembly
(see page 31)
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the ixture must be installed, lushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• The drain valve must only be used as intended. It is
not allowed to attach other objects to the drain
valve, for example a semi-pedestal.
• If the instantaneous water heater causes problems
or if you wish to increase the water low, the
EcoSmart
®
(low limiter) located behind the aerator
can be removed.
Technical Data
This mixer series-produced with EcoSmart
®
(low limiter)
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 70°C
Recommended hot water temp.:
65°C
Thermal disinfection:
max. 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Dimensions
(see page 36)
Flow diagram
(see page 36)
with EcoSmart
®
without EcoSmart
®
Spare parts
(see page 38)
XXX = Colors
000 = Chrome Plated
130 = Polished Bronze
140 = Brushed Bronze
330 = Polished Black Chrome
340 = Brushed Black Chrome
670 = Matt Black
700 = Matt White
990 = Polished Gold-Optic
Cleaning
(see page 35)
Operation
(see page 34)
Hansgrohe recommends not to use as drinking water
the irst half liter of water drawn in the morning or after
a prolonged period of non-use.
Test certiicate
(see page 40)
Содержание Metropol74515 Series
Страница 32: ...32 3 Nm 10 11 7 8 9 6a 6b 34 mm 34 mm...
Страница 33: ...33 SW 19 mm 4 Nm SW 9 mm 2 min 12 13 14 15 16 18 17...
Страница 39: ...39...