Hans Grohe Metropol 14837 Series, Инструкция по использованию/Инструкция по сборке

Страница: 4 / 40

4
Assembly see page 32
Test certificate (see page 40)
Cleaning (see page 37)
If the waterflow drops, clean the filter
located between hose and handspray.
Operation
(see page 36)
Hansgrohe recommends not to use as
drinking water the first half liter of water
drawn in the morning or after a prolonged
period of non-use.
Spare parts
(see page 38)
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Dimensions (see page 32)
Do not use silicone containing acetic acid!
To adjust the hot water limiter on single lever
mixers, please see page 35. Using a hot
water limiter in connection with a continuous
flow water heater is not recommended.
Maintenance (see page 37)
The non return valves must be checked
regularly according to DIN EN 1717 in
accordance with national or regional
regulations (at least once a year).
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The hot and cold supplies must be of equal
pressures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The fitting must be installed, flushed and tested after
the valid norms!
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80°C
Recommended hot water temp.: 65°C
Rate of flow by 0,3 MPa:
Handspray flow rate:
10 l/min
Aerator flow rate: 9 l/min
Thermal disinfection: max. 70°C / 4 min
Anti-pollution function
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
The product is exclusively designed for drinking water!
English