4
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal pres-
sures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 70°C
Connections:
cold right - hot left
Recommended hot water temp.:
65°C
Thermal disinfection:
max. 70°C / 4 min
• The product is exclusively designed for drinking water!
• Safety against backflow
English
Flow diagram
(see page 16)
Do not use silicone containing acetic acid!
Operation
(see page 15)
Hansgrohe recommends not to use as drink-
ing water the first half liter of water drawn
in the morning or after a prolonged period
of non-use.
Cleaning
(see page 21)
Spare parts
(see page 18)
Symbol description
Dimensions
(see page 16)
Test certificate
(see page 18)
Assembly see page 11
Adjustment
(see page 14)
To adjust the hot water limiter. Using a hot
water limiter in combination with a continu-
ous flow water heater is not recommended.
Fault
Cause
Remedy
Insufficient water
-
check valve hasn't moved back
-
Exchange check valves
Mixer stiff
-
Cartridge defective, calcified
-
Exchange cartridge
Mixer dripping
-
Cartridge defective
-
Exchange cartridge
Instantaneous heater didn’t work
-
Flow limiter in handshower isn’t
removed
-
Remove flow limiter
-
Filters are dirty
-
Clean filters
-
check valve hasn't moved back
-
Exchange check valves
Hot water temperature too low
-
Hot water limiter incorrectly set
-
Set hot water limiter
Содержание Metris Puro 31461000
