Hans Grohe Focus E2 31936007, Инструкция по использованию/Инструкция по сборке, Страница: 3 / 12

3
English
Safety Notes
Gloves should be worn during installation to
prevent crushing and cutting injuries.
The product may only be used for bathing,
hygienic and body cleaning purposes.
The hot and cold supplies must be of equal
pressures.
Do not allow the streams of the shower touch
sensitive body parts (such as your eyes). An
adequate distance must be kept between the
shower and you.
The product may not be used as a holding
handle. A separate handle must be installed.
Installation Instructions
• Prior to installation, inspect the product for
transport damages. After it has been installed, no
transport or surface damage will be honoured.
• The pipes and the fixture must be installed,
flushed and tested as per the applicable
standards.
• The plumbing codes applicable in the respective
countries must be observed.
Technical Data
This mixer series-produced with
EcoSmart®
(flow limiter)
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 - 0,5 MPa
Test pressure: 1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 70°C
Recommended hot water temp.: 65°C
Thermal disinfection: max. 70°C ⁄ 4 min
• Safety against backflow
• The product is exclusively designed for drinking
water!
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 11)
Flow diagram
(see page 11)

Hand shower

Bath Spout
Spare parts (see page 12)
Cleaning
(see page 8)
Operation (see page 7)
Maintenance check valve
(see page 6)
The check valves must be checked regularly
according to DIN EN 1717 in accordance
with national or regional regulations (at
least once a year).
Assembly
(see page 4)