2
English
Assembly
(see page 4)
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• There must be an access door for maintenance.
• When assembling the iBox universal with integrated
safety combination (HD) pay attention that the
middle of the mixer is min. 280 mm above the upper
edge of the bath tub.
• When installing a different flush-type fitting than the
iBox universal, DIN EN 1717 requires the pipe
interruptor (DB) to be at least 150 mm above the tub
brim.
• Connection with flexible hose
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 70°C
Recommended hot water temp.:
65°C
Thermal disinfection:
max. 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Dimensions
(see page 5)
Flow diagram
(see page 5)
Spare parts
(see page 8)
Special accessories
(see page 8)
order as an extra
Siphon trap assy. #56373000
Cleaning
(see page 6)
Operation
(see page 7)
+
Center bath tub
Содержание Exafill 58129003
Страница 4: ...4 SW 2 mm 1 2 3 4 5 6 1 2...
Страница 7: ...7...