0 4
A S S E M B L Y (see page 36)
EN
S A F E T Y N O T E S
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The arm of the shower head is intended only to hold
the shower head. Do not load it down with other
objects!
I N S T A L L A T I O N I N S T R U C T I O N S
⁄ Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
⁄ The pipes and the fixture must be installed, flushed and
tested as per the applicable standards.
⁄ The plumbing codes applicable in the respective coun-
tries must be observed.
⁄ During installation of the product by qualified trained
personnel, make sure that the entire fastening surface
is even and smooth (no protruding seams or tile offset),
that the finish of the wall is suitable to apply the product
and has no weak points.
T E C H N I C A L D A T A
Operating pressure:
max. 0,6 MPa
Recommended operating pressure:
0,25 - 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 60°C
Thermal disinfection:
70°C ⁄ 4 min
The product is exclusively designed for drinking water!
S Y M B O L D E S C R I P T I O N
Do not use silicone containing acetic acid!
D I M E N S I O N S (see page 42)
F L O W D I A G R A M (see page 42)
I N S T A L L A T I O N E X A M P L E
(see page 34)
S P A R E P A R T S (see page 46)
C L E A N I N G (see page 44)
O P E R A T I O N (see page 43)
T E S T C E R T I F I C A T E (see page 43 )
i
F A U L T
C A U S E
R E M E D Y
⁄ Head shower extremely leaky
⁄ Head shower soiled ⁄ scaled
⁄ Clean ⁄ descale head shower
⁄ Shower drips continuously
⁄ Shut-off unit damaged
⁄ Exchange shut-off unit
⁄ Water drips from showerhead a short
time after the valve is closed
⁄ Normal clearing of pipes
⁄ Sprays not operating properly
⁄ Flow pressure too low
⁄ Check water pressure (If a pump has
been installed check to see if the pump
is working).
⁄ Increase water pressure
⁄ Filters are dirty
⁄ Clean filters
Содержание AXOR ShowerComposition 12593 Series
