![background image](http://html1.mh-extra.com/html/hannspree/se32lmnb/se32lmnb_user-manual_3675789004.webp)
ENGLISH
4
Preface
Thank you for purchasing a Hannspree LED TV. Your new TV will allow you to enjoy superior audio and video while
enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or operating your TV. To ensure the safe and
correct installation and operations of the TV, it is important that the safety and operation instructions in this manual
are followed.
This instruction manual is designed to assist you in setting up and using the TV. The information in this manual
has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The
information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not be liable for direct, indirect, special,
exemplary, incidental or consequential damages arising from any defect or omission in this manual, even if advised
of the possibility of such damages in advance.
Warranty and Service / Repair
For complete warranty service information, please refer to the “Warranty Card” enclosed with your TV.
Service and Repair Information for United Kingdom:
Should the need for service arise, please contact HANNspree Technical Service Center and refer to the warranty
card for the Terms and Conditions.
Please visit HANNspree Europe Website:
http://www.hannspree.com/eu
and go to the “Service” – “Repair Service” section.
Packing Material Disposal:
Please refer to your local laws and directives to ensure an environmentally safe disposal.
Keep this manual for later use.
Cleaning
Instruction for cleaning the TV
1
Clean your TV frequently with a soft cloth to remove dust and dirt. More persistent dirt can be removed with a moist
cloth with soft soap.
2
Do not use detergents or any other aggressive cleaning. This might damage the housing or screen surface.
Notes:
The LED TV is for entertainment use only and visual display tasks are excluded.
•
This device uses a VGA connector to connect to a PC. To reduce the influence of main frequency on the source
•
signal, use a VGA monitor cable with ferrite shield.