PLL ALARM CLOCK RADIO
Model : HX-200
INSTRUCTION MANUAL
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER
AND THAT NO OBJECT FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED
ON APPARATUS.
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user
to the presence of
uninsulated “dangerous
voltage” within the
products enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.
CAUTION
The exclamation point
within an equilateral
triangle is intended to
alert the user to the
presence of important
operating and
maintenance
(servicing) instructions
in the literature
accompanying the
appliance.
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
Warning: To reduce the
rise of electric shock, do
not remove cover (or back)
no user-serviceable parts
inside. Refer servicing to
qualified service
personnel.
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3. Heed
all
warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13.
Unplug this apparatus during lightning storms or when unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Grounding or Polarization – This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the other). This plug will fit
into the power outlet only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
Alternate Warnings - This product is equipped with a three-wire grounding-type plug, a plug
having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This
is a safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
16. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and these openings
must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
17.
The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
18.
回
CLASS II apparatus with double insulation, and no protective earth provided.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
needed.
– Consult the dealer or an experienced radio/TV technician for help.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
1
/SOURCE / AL.OFF Button
11
ALARM2 BUZZER Indicator
2
TIME / MEM / M
+
Button
12
ALARM2 RADIO Indicator
3
AL2 / VOL
−
Button
13 LED
Display
4
AL1 / VOL
+
Button
14 Speaker
5
MIN / SKIP
−
Button
15 DC
Jack
6
HOUR / SKIP
+
Button
16 USB
Port
7 SNOOZE
Button 17
FM
Wire
Antenna
8 PM
Indicator
18
Battery
Compartment
9
ALARM1 BUZZER Indicator
10
ALARM1 RADIO Indicator
CONNECTING THE UNIT TO POWER
Plug one end of the AC adaptor into the DC power Input, and then plug the other end into AC wall
outlet. Before switching on the unit, make sure that the voltage of your electricity supply is the
same as that indicated on the rating plate.
BATTERY BACKUP
Insert two pieces UM-4 batteries into the battery compartment. Be sure to observe the proper
polarity (the "+" and "-" signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time and alarm time settings, the
stored radio stations are preserved in the memory of the unit by means of battery back-up
function.
SETTING THE CLOCK
1.
With the unit in CLOCK mode (RADIO off), press and hold the TIME/MEM/M
+
button for
about 1 second, the time will begin to flash on the LED display.
2.
Press the HOUR button to adjust the hour.
3.
Press the MIN button to adjust the minute.
4.
When the correct time is selected, press the TIME/MEM/M
+
button again to confirm.
SETTING THE ALARMS
1.
With the unit in CLOCK mode (RADIO off), press and hold the AL1 or AL2 button. The
ALARM time will begin to flash on the LED display.
2.
Press the HOUR button to adjust the alarm hour.
3.
Press the MIN button to adjust the alarm minute.
4.
When the correct time is selected, press the AL1 or AL2 button to confirm.
5.
Press the AL1 or AL2 button to select the ALARM sound mode – [B] buzzer or [R] currently
set radio station. The corresponding LED indicator will light up.
SNOOZE FUNCTION
1.
Whenever the alarm (buzzer or radio) activates, it can be temporarily suspended for a short
period of 9 minutes by pressing the SNOOZE button once.
2.
The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE
period has ended.
3.
This procedure can be repeated for up to approximately one hour.
WARNING
