73
72
The "LOG" indicator is displayed
when the meter starts to log.
When the instrument
is in this mode and
you want to stop be-
fore the end time,
press PGM plus 0.
PROGRAM #5 (pH 302)
This is the same as program #4 except that
function "3" allows you to select an interrupt
value for pH/mV instead of end time.
When this interrupt value is exceeded, the
program prints the hour and minute of the
endpoint.
To enter the program press PGM plus 5.
DATE
2/04
TIME
10.20
SAMPLE
202
°C
20.3
pH
6.38
DATE
2/04
TIME
10.25
SAMPLE
203
°C
20.4
pH
6.39
DATE
2/04
TIME
10.30
SAMPLE
204
°C
20.3
pH
6.38
LOG
PGM
0
5
PGM
• To set the finishing time (choice #3), press
3 followed by ENTER.
"
P4.3
" will be displayed on the second-
ary LCD with "
0
" on the primary one.
• Enter the desired number followed by EN-
TER. E.g. Finishing time 11:30.
Hours and minutes must be separated by
a decimal point.
The printer will print the value.
3
ENTER/
1
ENTER/
PROGRAM 4
1 enter start
time
2 enter time int-
erval
3 enter end time
start time
10:20
time interval
00:05
finishing time
11:30
1
.
3
0