Hanna Instruments HI 9017 Скачать руководство пользователя страница 46

Страница: 46 / 64

Data transmission from the instrument to
the PC is now much easier with the new

HI92000

Windows

compatible applica-

tion software offered by Hanna Instruments.
User friendly,

HI92000

offers a variety of

features and has an on line help feature to
support you throughout all situations.

HI92000

allows you to use the powerful means of the most diffused

spread sheet programs (e.g. Excel

, Lotus 1-2-3

). Simply run your

favorite spread sheet and open the file downloaded by

HI92000

. It is

then possible to make any elaboration available with your software
(e.g. graphics, statistical analysis).
To install

HI92000

you need a 3.5" drive and few minutes to follow

the instructions conveniently printed on the disk’s label.
Contact your Hanna Dealer to request a copy.
To connect your Hanna Instruments bench meter

to the PC use

HI920010

, available through your Hanna Dealer. Make sure that your

meter is switched off and plug the connectors, one into the meter
RS232C connector, the other into the serial port of your PC.

Note

: Cables different from the

HI920010

may use a different con-

figuration. In such case any communication between the meter
and the PC is not possible.

SETTING THE BAUD RATE

The transmission speed (baud rate) of the meter and the external
device must be identical. The meter is factory set to 1200.
If you wish to change this value, please contact your nearest Hanna
Center.

SENDING COMMANDS FROM PC

With terminal programs such as, for example, Telix

, Windows Termi-

nal

, it is possible to remotely control your Hanna Instruments bench

meter. Use

HI920010

cable to connect the meter to the PC, start the

terminal program and set the communication options as follows: 8, N,
1, no flow control.

COMMAND TYPES

To send a command to the pH meter the scheme is:
<DLE> <

command>

<CR>

Excel© Copyright of "Microsoft Co."

Lotus 1-2-3© Copyright of "Lotus Co."

Windows® and Windows Terminal ® are registered Trademark of "Microsoft Co."

TELIX® is registered Trademark of "Deltacomm"

INTERFACE WITH COMPUTER

Содержание HI 9017

































































Результаты поиска

Содержание HI 9017

Отзывы:

Hanna Instruments HI 9017, Инструкция по эксплуатации, Страница: 46 / 64

Результаты поиска

Содержание HI 9017

Отзывы: