53
3) Direct/AutoHold Reading Mode and Automatic Log
Press
and then
keys must be pressed on front
display to initiate this function. Real time continuous measurements
are on display with “
AutoHold
” flashing and real time continuous
logging into meter memory, until the meter reaches the stability
criteria to go into Auto Hold mode. The stored sample logs will
be marked with an
“H”
to indicate the Auto Hold mode. The virtual
key
returns operation to real time continuous measurements
and
stops the logging session.
4) Direct/AutoHold Reading Mode and Manual Log
Press
in order to add one new record in the log report.
The manual log is working even if it is in Auto Hold or Continuous reading mode. Press
to initiate
the Auto Hold event. “
AutoHold
” will flash until the stability criteria is reached and then the screen freezes
in Auto Hold mode, the data is marked with an
“H”
.
5) Direct/AutoHold Reading Mode and Auto Hold Log
Press
and then
keys to initiate and automate the capture of stable data which is stored in
the Recall Manual Log file. During the process, “
AutoHold
” will flash until the stability criteria is reached
and then the screen freezes in Auto Hold mode, the data is logged and marked with an
“H”
. The virtual key
returns operation to Real time continuous measurement. Press
again to log a second stable
data point. The lot ID along with the record index will appear for short time on the top/left corner on the
selected channel window, every time a record will be added to the lot.
LOG RECALL
This feature allows the user to view all stored data. If no data
were logged, the “
No records were found.
” message will be
displayed on the LCD in the Log Recall screen. Otherwise, the
instrument will display all the memorized lots in accordance
with the selected option: Automatic Log, Manual Log or USP
Reports.
To view the memorized data:
• Press
while in
Measure mode.
• Press
and then select the log report type.