Hanna Instruments HI 4521 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 58

Hanna Instruments HI 4521 Скачать руководство пользователя страница 34

34

Alarm

This option allows the user to edit the alarm settings:

Alarm State and Alarm Limits. If the Alarm option is enabled,

a continuous double beep will be heard, along with the “Alarm” indicator blinking on the LCD, each time the set
limits in

Measure mode are exceeded.

Alarm State
Three modes are available for the

Alarm State option:

Disabled – the alarm will be disabled.
Inside Limts – the alarm will notify the user when the measured value is inside the set limits.
Outside Limits – the alarm will notify the user when the measured value is outside the set limits.
To set the Alarm State:

• Use

or

to select the

Alarm option.

• Press

and use

or

to highlight the

Alarm State option.

• Press

and use

or

to highlight the

desired option.

• Press

to confirm your selection or press

to

cancel operation.

Alarm Limits
This option allows the user to set the alarm limits for the measured value.

Note

: The Alarm High value can not be lower than the Alarm Low value.

To set the Alarm Limits:

• Use

or

to select the

Alarm option.

• Press

and use

or

to highlight the

Alarm Limits option.

• Press

and use

/

to select next /

previous entry to be edit.

• Press

and use

or

to set the desired

value, then press

to save the modified value.

• Press

to return to the Alarm options. If the Saving

83

The Salinity Setup menu allows the user to set the parameters related to Salinity measurement and
calibration.

Accessing Salinity Setup

• Press

while in

Measure mode and then

to

select

Salinity range.

• Press

and then

to access

Salinity Setup

menu.

To access an

Salinity Setup option:

• Use

or

to highlight the desired option.

• Press

to access the selected option.

The following is a description of the

Salinity Setup option screens.

Profile -

see

Conductivity Setup section.

Reading Mode

-

see

Resistivity Setup section.

Temperature

This option allows the user to choose the temperature source and units.
To access a Temperature options:

• Use

or

to highlight the Temperature option.

• Press

to access Temperature option.

• Press

to confirm your selection and use

or

to enable the parameter by selecting

Yes or to disable it by selecting No.

Temperature Source, Temperature Unit

-

see

Conductivity Setup section.

SALINITY

SALINITY

SALINITY

SALINITY

SALINITY SETUP

SETUP

SETUP

SETUP

SETUP

«
...
32
33
34
35
36
...
»

Содержание HI 4521



























































Отзывы:

Нет отзывов