manualshive.com logo in svg

Hanna Instruments HI 2550, Инструкция по эксплуатации, Страница: 39 / 64

Поделиться
Скачать
Hanna Instruments HI 2550 Скачать руководство пользователя страница 39

39

BEEP STATUS

Press 

CAL

 when the beep status is displayed. Beep status (“

On

” or 

“

OFF

”) and “

CFM

” will start blinking.

Press the 

ARROW

 keys to change the beep status (On or OFF).

Press 

CFM

 to save the modified beep status.

Press 

CAL

 to escape without saving.

When enabled, beep sounds as a short beep every time a key is pressed 
or when the calibration can be confirmed.
A long beep alert means that the pressed key is not active or a wrong 
condition is detected while in calibration.

INSTRUMENT ID

Press 

CAL

 when “

InId

” is displayed. The instrument ID (“

0000

“ to 

“

9999

“) and “

CFM

” will start blinking.

Press the 

ARROW

 keys to change the instrument ID value.

Press 

CFM

 to save the modified instrument ID value.

Press 

CAL

 to escape without saving.

Note: The instrument ID is downloaded to a PC as part of a logged 

data set to identify its origin.

TEMPERATURE UNIT

Press 

CAL

 when “

Unit

“ is displayed. The temperature unit and “

CFM

” 

will start blinking.

Press the 

ARROW 

keys to change the option.

Press 

CFM

 to save the modified temperature unit.

Press 

CAL

 to escape without saving.

Содержание HI 2550

































































Отзывы:

Нет отзывов