Hanna Instruments HI 2550 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 64

Hanna Instruments HI 2550 Скачать руководство пользователя страница 29

29

When the selected interval is reached or when the reading is stable (for
log on stability), the instrument will display the current lot number on
the primary LCD line, the record number on the secondary LCD line and
the LOG tag (see example below: Lot 1 record 11):

followed by the number of free records on the corresponding memory
space.

If stability logging is selected, a complete set of data is memorized every
time the reading becomes stable after an unstable condition.
To stop interval logging press

LOG

key again. The “

LOG

” tag will be

cleared.

Note: When pressing any key that is not active, while lot logging

is running, the following message is displayed for a few seconds.

VIEW LOGGED DATA

Press the

ALT&RCL

keys while in measurement mode to retrieve the

stored information.
If no data was logged for the current selected measurement range and
no lots are memorized, one of the next messages will be displayed:

LOT LOGGING

Select “

StAb

” (stability logging) or the desired time interval.

To start interval logging press

LOG

key while the instrument is in

measurement mode.

«
...
27
28
29
30
31
...
»

Содержание HI 2550

































































Отзывы:

Нет отзывов