Hanna Instruments HI 2550 Скачать руководство пользователя страница 11

Страница: 11 / 64

Automatic (ATC)

: The conductivity probe has a built‑in temperature

sensor; the temperature value is used to automatically compensate the
EC/TDS reading. The “

ATC

” tag is displayed when this option is active.

Manual (MTC)

: The temperature value, shown on the secondary LCD,

can be manually set with the

ARROW

keys. The “

ºC

” tag blinks and

the “

MTC

” tag is displayed when this option is active. This value will be

used to compensate the EC/TDS reading.

No Compensation (notc)

: The temperature value is displayed, but not

taken into account. When this option is selected the “

ºC

” tag will blink

with slower frequency and the “

NO TC

” tag is displayed. The reading

displayed on the primary LCD is the uncompen‑
sated EC or TDS value.
To select the desired option, press the

ALT&ATC

keys until the option is displayed on the LCD.

Note: The default compensation mode is ATC. If no temperature

probe is detected, ATC mode can not be selected and the instrument

displays “

‑‑‑‑

” on the secondary LCD.

If temperature compensation is selected, measurements are compensated
using the temperature coefficient (default value 1.90 %/ºC). To change
the temperature coefficient, enter the setup mode and select “

” (see

SETUP for details, page 36). The current temperature coefficient can
be quickly viewed by pressing the

ALT&TC

keys. The value is briefly

displayed on the LCD.
• If the temperature reading exceeds the limits of the meter (–20.0 ºC

to 120.0 ºC), the “

ºC

” tag will blink and the closest full scale value

will be displayed.

TDS MEASUREMENTS

Press the

ALT&MODE

keys while in EC range. The instrument will switch

to TDS measuring range. The TDS reading will be displayed on the primary
LCD and the temperature reading on the secondary LCD.

• If the reading is out of range, the full‑scale value (100.0 g/L for MTC/

ATC mode or 400.0 g/L for uncompensated TDS) will be displayed
blinking.

• If

LOCK

was pressed and the reading goes out of range, the full‑scale

value of the frozen range will be displayed blinking.

Содержание HI 2550

































































Результаты поиска

Содержание HI 2550

Отзывы:

Hanna Instruments HI 2550, Инструкция по эксплуатации, Страница: 11 / 64

Результаты поиска

Содержание HI 2550

Отзывы: