manualshive.com logo in svg

Hanna Instruments HI 2550, Инструкция по эксплуатации, Страница: 10 / 64

Поделиться
Скачать
Hanna Instruments HI 2550 Скачать руководство пользователя страница 10

10

•  If the reading is out of range, the closest full‑scale value will be 

displayed blinking on the primary LCD.

RELATIVE mV MEASUREMENTS

•  Press the 

ALT&MODE 

keys simultaneously while in mV range. The 

“

mV

” and “

Rel

” tags are displayed.

The reading displayed by the instrument is equal to the difference between 
the current mV input value and the relative mV offset established in the 
relative mV calibration.

CONDUCTIVITY MEASUREMENTS

Connect the conductivity probe to the instrument.
•  Press the 

RANGE

 key to enter conductivity measurement range (EC).

•  Submerse the probe into the solution to be tested. The 

sleeve holes must be completely submersed. Tap the 
probe repeatedly to remove any air bubbles that may 
be trapped inside the sleeve.

•  The conductivity value will be displayed on the primary LCD and the 

temperature on the secondary LCD.

•  If the reading is out of range, the full‑scale value (200.0 for MTC/ATC 

mode or 500.0 for actual conductivity) will be displayed blinking.

• If 

LOCK

 key was pressed and the reading goes out of range, the 

full‑scale value of the frozen range will be displayed blinking.

The conductivity reading is affected by temperature.
Three options for temperature compensation are available in conductivity 
measurement mode.

Содержание HI 2550

































































Отзывы:

Нет отзывов