Hanna Instruments Edge HI 2020 Скачать руководство пользователя страница 19

Страница: 19 / 64

Setup/Installation

Logged data on the edge® can be transferred from the meter to a PC by

following these simple directions. Suitable operating systems include Windows

(Xp minimum), OS X or Linux.

1. Connect edge® to the PC using the supplied micro USB cable.

2. Turn on edge®.

3. Press

SETUP

and select “LOG ON EDGE”

4. Press

MODIFY

then use

keys to change to “EXPORT TO USB”

5. Press

CFM

and the USB/PC Tag is displayed.

6. Press

SETUP

to exit

The PC should detect the USB as a removable drive. Open the drive to view the

stored files. Log files are formatted as Comma separated values (*.CSV) and can

be opened with any text editor or spreadsheet program. (

Note

: Field separator

may be set as comma or semicolon depending upon region preferences, see

Setup.)

Note

•

Western Europe (ISO-88859-1) character set and English language are

suggested settings.

•

Other files may be visible depending upon computer settings. All files

stored will appear in this folder.

•

Adjust Font or column width appropriately. Adjust the decimal places if the

pH was logged with 0.001 resolution.

•

All conductivity measurements will be displayed as μS/cm.

Interval logs are designated as pH, EC or DO Lots. ie. PHLOT001, ECLOT002,

DOLOT003.

The Manual Lots are PHLOTMAN, ECLOTMAN, and DOLOTMAN.

The Stability Lots are PHLOTSTA, ECLOTSTA, and DOLOTSTA. All stability logs,

regardless of stability setting, are located in the same stability file for that

measurement.

Click on the desired log to view data.

Note

•

If “ºC !” appears in log data, the electrode/probe was used beyond it’s
operation specifications and the data is not considered reliable.

•

If “ºC !!” appears in log data, the temperature sensor within the probe or
electrode is broken and the device should be replaced. Logged data should
not be considered reliable.

PC & Storage

Interface

www.

.com

[email protected]

1.800.561.8187

Содержание Edge HI 2020

































































Результаты поиска

Содержание Edge HI 2020

Отзывы:

Hanna Instruments Edge HI 2020, Инструкция по эксплуатации, Страница: 19 / 64

Результаты поиска

Содержание Edge HI 2020

Отзывы: