Quick Guide
Supra R17
Cat. No. : SU-R17
Display & Control Panel
Press the Temp
button more than 2sec.
Set the desired temperature
(see ‘Setting Run Parameters’)
↓
Save : Press the Program button twice
Call : Press the Program button once
Fast
Cool
Pulse
End Alarm
Sound volume(0~10, 0: Silent)
At Set Speed
LED On : Time is counted when reaching the set speed
LED Off : Time is counted immediately after the start
Press more than 2sec. : Setting number of end alarm
Program Save/Call
Press once : Calling up a program
Press twice : Saving a program
Setting Time
Up to < 10 hr
Continuous run(00:00)
Key Lock / Unlock
17000 01:10 25
Lid Open
Start / Stop
Max. RPM :
17,000 rpm
Max. RCF :
34,249 xg
Display Screen
Status of RPM / RCF / Time /
Temperature / ACC / DEC / Program
Setting ACC / DEC Rate
ACC (1 ~ 9 steps, Max.9)
DEC (0 ~ 9 steps, Natural DEC.0)
Setting Speed
Press once : Setting RPM
Press twice : Setting RCF
Pulse
After reaching the set
speed, the centrifugation
is decelated and stopped
Setting Temperature
-20℃ ~ 40℃
Fast Cool : Quickly lower the tem-
perature of the chamber and the
rotor to the desired temperature
Saving / Calling Up
a Program
Setting Run Parameters
(RPM / RCF / Time /
Temperature / ACC / DEC)
Press the
Pulse button
Enter the desired speed
(See ‘Setting Run Parameters’)
Serial No.
Installation Date
Press a parameter
to be changed
Enter the desired values
on the keyp
a
d
Press the
Enter button
Press the
Enter button
Enter the desired program
number on the keypad
Press the
Save or call button
