Press the Setup /
Enter button
Press the
Call
/
Save button
Select the program number
(Press the ▲or▼ button)
Saving / Calling Up a Program
Display Sceen
RPM / RCF / Time / Temperature(R17) / Program / ACC / D
E
C
Fast Cool
(Smart R17 Plus)
Quickly lower the temperature
inside the chamber and rotor to
the desired temperature
RPM setting mode: RPM flashes
RCF setting mode : RCF flashes
Time setting mode: 00’ 00’’ flashes
Temperature setting mode : 00 ℃ flashes
ACC/DEC setting mode : Accel/
Decel
flashes
Press the Setup /
Enter button
Press the Setup /
Enter button
Select a parameter to be
changed (Press the ◀or▶ but-
ton)
→
Up or down the values
(Press the ▲or▼ button)
Setting Run Parameters
(RPM / RCF / Time / Temperature (R17) / ACC / DEC)
Press the Fast cool
button more than 2sec.
Fast Cool (Smart R17 Plus)
Press the short button
more than 2 sec.
Set the desired temperature
(see ‘Setting Run Parameters’)
Set the desired Speed
(see ‘Setting Run Parameters’)
Short Spin
Smart R17 Plus Smart 15 Plus
Max. RPM
17,000 rpm
15,000 rpm
Max. RCF
23,005 xg
21,055 xg
Timer
< 100 min, pulse,
continuous
Temperature
Range
-10℃ to
40℃
-
ACC / DEC
Ramps
9/10
Quick Guide
Smart R17 Plus / Smart 15 Plus
Cat. No. : SM-R17PL / SM-15PL
Lid Open
Serial No.
Installation Date
Display & Control Panel
Program Save / Call
Saving / Calling up a program (Up to 10)
Start / Stop / Short
- Start or stop the centrifugation
- Short run centrifugation
Cursor keys / Enter
Function selection(◀,▶)
Up or down the values(▲,▼)
Save the values(●)
Save
Select the program number → Press the Enter button
→ Set the parameters → Press the Setup / Enter button
Call up
Select the program number → Press Setup / Enter button
