Quick Guide
Component wR
Cat. No. : CP-wR
Display & Control Panel
PULSE
xg
VIEW
SETTINGS
Start
Stop
Lid Open
Max. RPM :
4,500 rpm
Max. RCF :
5,096 xg
Display Screen
Status of RPM / RCF / Time /
Temperature / Rotor ID /
ACC / DEC / Program
Setting Speed
Press once : Setting RPM
Press twice : Setting RCF
Setting Time
Up < 100 hr
Continuous run (00:00)
View Settings
Verifying the setting
parameters during
centrifugation
Setting Temperature
Setting temperature ( -20℃ ~ 40℃)
Setting temp. limit
Pulse
Program Save / Call
Saving a program
(up to 100)
Calling up a program
Setting the Rotor ID manually
Enter the rotor ID. manually, when
rotor id is not identified automatically
Press the
Pulse button
Enter the desired speed
(See ‘Setting Run Parameters’)
Saving / Calling Up a Program
Press a parameter
to be changed
Press the
Enter button
Enter the desired values
on the keypad
Enter the desired
program number on
the keypad
Press the
Save or call button
Setting Run Parameters
(RPM / RCF / Time / Temperature / ACC / DEC)
Press the
Enter button
Press the
Temp. limit button
Press the
Enter button
Temperature range that stops operation when the temperature
is lower or higher than the set temperature.
Enter the desired
temperature range
on the keypad
Setting Temp. Limit
Pulse
After reaching the set
speed, the centrifugation
is decelated and stopped
Setting ACC / DEC Rate
ACC (0 ~ 9 steps, Max.9)
DEC (0 ~ 9 steps, Natural DEC.0)
Serial No.
Installation Date
2
3
1
5
6
4
8
9
7
0
±
