HANGCHA XE Series, Руководство по эксплуатации и обслуживанию

Страница: 77 / 82

73
operating them.
– When accessories with lower hook positioning are installed, the joint spacing between the
lower hook and the lower beam of the fork arm carrier should be adjusted appropriately.
7.2 Use of attachments
– Become familiar with the relevant content on the nameplate of the forklift truck, read the
relevant operation manual carefully before use (especially the user manual and installation manual
of the professional accessory company), and be trained and qualified to operate the forklift truck
accessories.
–
Fully understand the basic performance and operation methods of forklift accessories,
especially the allowable load, lift height, cargo size and the fitting range of accessories;
– When operating forklift truck accessories with multiple functions, such as side shift, clamping or
rotation, do not perform multiple operations at the same time. One action can be carried out only
after the other one is completed.
–
Forklift trucks provided with accessories must not be driven when the cargo is at a high level;
when the cargo volume is too large do not drive the forklift truck forwards; when transporting cargo,
ensure that cargo is 300 mm above the ground, and the mast is tilted backward;
– The weight of the cargo should not exceed the limit of the combined bearing capacity of the
forklift truck and accessories. Try not to load eccentrically at high cargo positions. Attachments with
side shift function can only be operated for a short time. Eccentric load is strictly limited to 100 mm
on the left and right (the side shift amount of the side shifter above 5 tons (including 5 tons)) is
within the range of ±150 mm).
– Except for the driver's position which is protected by the overhead guard, it is strictly prohibited
to stand within 2 meters of the projection area under accessories and cargo to avoid injury.
– It is strictly prohibited to emergency brake the forklift truck with accessories when driving and it
is necessary to drive slowly when carrying a load.
– Do not allow external forces to act on the truck when the attachment is working; do not use the
attachment for unsuitable purposes, and the normal working range of the attachment must not be
exceeded.
– Do not use accessories for unsuitable purposes, do not exceed the normal scope of work of
accessories.
– When accessories are faulty, they should not be used until the fault has been eliminated.