HANGCHA XE Series, Руководство по эксплуатации и обслуживанию

Страница: 51 / 82

47
shock.
5.1.2 Maintenance personnel must have a
electrician license issued by the State
Administration of Work Safety and should not
conduct maintenance without the ENEROC
maintenance authorization.
5.1.3 Wear insulated gloves when operating and
maintaining the battery system, and metal jewelry
such as watches are strictly prohibited.
5.1.4 When cleaning the truck, do not directly
flush the battery system to protect the battery
system from malfunctions caused by water
ingress.
5.2Instructions for installation
5.2.1 Installation personnel should have a relevant
license for installation, be provided with labor
protection, and pay attention to safety protection.
Before installing the battery system, make sure
that the low-voltage plug-in of the battery system
is disconnected from the truck. When connecting
the high-voltage system, pay attention to safety
protection to prevent an electric shock during
installation. During the installation of the battery
system, the battery should be mechanically lifted
and slowly installed into the battery compartment
of the truck, do not crush or damage the battery
case and external cables. During the installation of
the battery system, avoid high-voltage reverse
connection or short circuits, etc. To remove the
battery system from the vehicle, make sure that
the key for the whole vehicle is turned off and the
high-voltage cable and low-voltage plug-in are
disconnected from the whole vehicle.
5.2.2 Post-installation inspection: after the battery
system is installed, check the battery system stop
pins and fixing bolts to confirm that they meet the
battery system installation requirements. Check
that the high-voltage cable and low-voltage
plug-in are connected correctly and securely. Turn
the key switch to the “ON” position, the relay
should engage normally with no battery alarm. If
there is a battery fault alarm, cut off the power
immediately and notify our after-sales service
center for a solution.