50
3 Operation and safety precautions for the electric forklift lithium battery
1. Contact the manufacturer immediately in case of battery malfunction. Do not open the
battery cover for maintenance.
2. Do not reverse charge.
3. Whether it is charging or discharging, it should be ensured that the battery management
system is properly connected and working normally, and the communication of the battery
management system is normal.
4. Do not operate the equipment in a location where static electricity and magnetic field is
strong. Or it may damage safety protection device, and lead to potential safety hazard.
5. The battery system or battery box should be kept away from heat, fire, and direct sunlight
for a long time. It is also not allowed to directly bake and heat the lithium battery by hot
water, otherwise it will cause an explosion. It is not allowed to work in a high temperature
environment.
6. It is forbidden to place the battery pack in water or high humidity environment to avoid
leakage or insulation failure.
7. When working in a low temperature environment, the capacity of the battery system is
slightly reduced, which is a normal phenomenon, and the performance will recover when
the ambient temperature rises.
8. Unauthorized modification or dissection of the battery system and battery box is
prohibited to avoid danger. Non-professionals are not allowed to disassemble it without
authorization to prevent foreign objects from entering the battery pack, causing combustion
and explosion.
9. Lithium batteries have special chargers, and other types of chargers should not be used
to charge them, so as not to damage the lithium batteries.
10. Do not connect the battery with the battery of other type in series or in parallel.
11. Prevent water ingress and corrosion of diagnostic ports and connectors. etc.
12. It is forbidden to mix the battery box with batteries of other types or other manufacturers.
13. It is forbidden to directly connect the positive and negative electrodes of the battery box
or battery system with metal or other conductors to avoid ignition or short circuit; it is also
forbidden to contact and mix the battery pack with items that can cause short circuits.
14. Avoid mechanical damage to the battery box, such as extrusion, puncture, shock,
impact, etc.
15. If there is dust, metal chips or other debris on the top cover and pole of the battery pack,
use compressed air or dry cloth to clean it in time. It is forbidden to use water or objects
