5
Switches
Key [4]
OFF (O)
This is the position at which the
key inserted or drawn out.
Gasoline engine and diesel engine
stop at this position.
ON (
)
┃
The electric circuit is closed with
the starter switch at
“
”
┃
(ON). After the
engine is started, the key is at this
position.
START ( )
As the key is placed in the
“START” position, the starter motor is
engaged. When removing hand off key,
it is automatically returned to the “ON”
position by spring force.
Diesel engine
Turn the key to “ON” position and
the indicator lights up for a moment.
After the indicator goes out, turn the key
to “Start” position.
Caution
1.Do not keep the starter switch in the
“
”(ON)
┃
position while engine is shut
down. This result in a discharge
battery.
2.With the engine running, do not turn
the starter switch into the (START)
position, since there is a danger of the
starter motor being damaged.
3.Do not keep the starter engaged for
more than 5 seconds at a time. Wait
about 120 seconds before trying again.
Turn signal lever [5]
Use this lever which is at the right
side of turning rod to indicate the
turning direction of the truck.
R
-turn
right,
N
-neutral,
L
-turn left.
The turn signal level does not
automatically return to the neutral
position unlike general passenger cars.
Reset it by hand.
